ZKL PLC 912-86 Special bearings

Oil Speed Rating n2:4800 rpm; Basic Static Radial Load Rating Co:106000 N; Fillet Radius ra:1.50 mm; Accessories:One Seal; Grease Speed Rating n1:3600 rpm; d:65.000 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:88000 N; B:38.10 mm; Sealed Speed Rating n3:3600 rpm;

b:mm; Static (Coa):981 kN; D:260 mm; rs (min):3 mm; F:154 mm; E:mm; d2:120 mm; Pu:98.680 kN; s:6.4 mm; r1s (min):3 mm;

Reference speed:430 r/min; D1 ≈:969 mm; Da max.:1056 mm; r1,2 min.:7.5 mm; K:12 mm; da min.:704 mm; Basic dynamic load rating C:12100 kN; rb max.:6 mm; Calculation factor kr:0.32; D:1090 mm;

d:1.375 in; Fillet Radius ra:0.04 in; Grease Speed Rating n1:11000 rpm; Fillet Radius rb:0.024 in; Oil Speed Rating n2:40000 rpm; Basic Dynamic Radial Load Rating C:22500 N; Basic Static Radial Load Rating Co:15600 N; D:2.5625 in; B:0.5625 in;

P150°:25.4 kN; Da:130 mm; Max. speed for PosiTrac Plus seal:2350 r/min; H:157.559 mm; da:60.325 mm; Mass pillow block:13.1 kg; H2:28.575 mm; Cap bolt recommended tightening torque:81.3 N·m; R2:21.431 mm; Cap bolt:2 x 1/2-13 UNC;

Housing:SAF 528; R1:87.313 mm; Pa:28.5 kN; Cap bolt recommended tightening torque:400 N·m; Mass pillow block:68 kg; H1:152.4 mm; L:511.175 mm; Cap bolt:2 x 1-8 UNC; J1:85.725 mm; P90°:149 kN;

D:225.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:2100 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Accessories:Snap-Ring; B:54.00 mm; Basic Static Radial Load Rating Co:150000

Calculation factor Y0:1.6; D1 ≈:336 mm; d2 ≈:271 mm; ra max.:3 mm; b:13.9 mm; B:160 mm; da min.:257 mm; Calculation factor e:0.4; Reference speed:750 r/min; Da max.:383 mm;

Basic Dynamic Radial Load Rating C:1010000 N; Fillet Radius ra:4.00 mm; Fillet Radius rb:1.50 mm; Grease Speed Rating n1:880 rpm; B:160.00 mm; d:260.000 mm; Basic Static Radial Load Rating Co:2040000 N; Oil Speed Rating n2:1100 rpm; D:480.0000 mm;

B:2.5 mm; M:194 mm; d:200 mm; f:20 mm; d1:222 mm; d2:245 mm; Mass lock washer:0.22 kg;

L:558.8 mm; Da:289.999 mm; Taconite seal:TER 130; S:4.763 mm; P120°:85.9 kN; End plug (suffix Y):EPR 16; Pa:38.5 kN; P180°:94.3 kN; Adapter sleeve assembly:SNW 32x5.7/16; H:336.55 mm;

S:0.794 mm; s:25.4 mm; d2:73.819 mm; A6:19.05 mm; Limiting speed:4100 r/min; a:2.381 mm; Attachment bolt diameter G:12.7 mm; A1:75.406 mm; N1:14.287 mm; L:139.7 mm;

Comparative radial load rating CF:4500 kN; Thrust factor K:1.84; Calculation factor Y2:3.3; Calculation factor Y0:2.2; T:560 mm; D1 ≈:916 mm; r1,2 min.:15 mm; Comparative axial load rating CFa:701 kN; Calculation factor e:0.31; Design variant/feature:TQON/GW;

d:25.000 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Accessories:Two Seals; B:25.40 mm; Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:20400 N; Grease Speed Rating n1:7500 rpm;

ba:26.194 mm; h:27.781 mm; Da:90 mm; H2:23.813 mm; P180°:12.5 kN; Cap bolt, SAE grade:5; S:3.572 mm; Cap bolt:2 x 7/16-14 UNC; P90°:17.3 kN; P120°:11.1 kN;